Install MariaDB 10.1 on Fedora 25/24, CentOS/RHEL 7.3/6.8/5.11


MariaDB is a binary drop in replacement for MySQL database server. This means that for most cases, you can just uninstall MySQL and install MariaDB and you are good to go.

Why MariaDB?

  • MariaDB is totally open source version of MySQL
  • It works just like MySQL and is compatible with MySQL setups
  • Fedora and Red Hat/CentOS is moving to use MariaDB from Fedora 19/RHEL 7/CentOS 7 versions
This is guide, howto install or upgrade MariaDB 10.1.20 [stable] (10.0.28 [stable] or 10.2.2 [beta] or 5.5.53 [stable]) on Fedora 25/24/23, CentOS 7.3/6.8/5.11 and Red Hat (RHEL) 7.3/6.8/5.11. Installing MariaDB is almost same process than install MySQL.
Note: If you are moving from MySQL, then make sure that you backup (dump and copy) your database and configs. And if upgrading from earlier versions, then remember run mysql_upgrade command. And if you uninstall MySQL, then remember restore /etc/my.cnf after installation, like:
Bash

mv -vi /etc/my.cnf.rpmsave /etc/my.cnf

Install MariaDB/MariaDB-server 10.1.20/10.0.28/10.2.2/5.5.53 on Fedora 25/24/23, CentOS 7.3/6.8/5.11, Red Hat (RHEL) 7.3/6.8/5.11

1. Change root user

Bash

su -
## OR ##
sudo -i

2. Install MariaDB repository

Following commands are just shortcut to install original MariaDB YUM repos, alternatively you can use MariaDB repository configuration tool.

Fedora 25/24/23

Note: currently Fedora 25/24/23 users can install MariaDB 10.1 and not additional repos needed or alternatively use MariaDB repos to install some other version.
Bash

## Fedora 25/24/23 MariaDB 10.1 ##
wget -O /etc/yum.repos.d/MariaDB.repo http://mariadb.if-not-true-then-false.com/fedora/$(rpm -E %fedora)/$(uname -i)/10_1

## OR ##

## Fedora 25/24/23 MariaDB 10.2 ##
wget -O /etc/yum.repos.d/MariaDB.repo http://mariadb.if-not-true-then-false.com/fedora/$(rpm -E %fedora)/$(uname -i)/10_2

CentOS 7/6/5

Bash

## CentOS 7/6/5 MariaDB 10.1 ##
wget -O /etc/yum.repos.d/MariaDB.repo http://mariadb.if-not-true-then-false.com/centos/$(rpm -E %centos)/$(uname -i)/10_1

## OR ##

## CentOS 7/6/5 MariaDB 10.2 ##
wget -O /etc/yum.repos.d/MariaDB.repo http://mariadb.if-not-true-then-false.com/centos/$(rpm -E %centos)/$(uname -i)/10_2

## OR ##

## CentOS 7/6/5 MariaDB 10.0 ##
wget -O /etc/yum.repos.d/MariaDB.repo http://mariadb.if-not-true-then-false.com/centos/$(rpm -E %centos)/$(uname -i)/10

## OR ##

## CentOS 7/6/5 MariaDB 5.5 ##
wget -O /etc/yum.repos.d/MariaDB.repo http://mariadb.if-not-true-then-false.com/centos/$(rpm -E %centos)/$(uname -i)/5

Red Hat (RHEL) 7/6/5

Bash

## Red Hat (RHEL) 7/6/5 MariaDB 10.1 ##
wget -O /etc/yum.repos.d/MariaDB.repo http://mariadb.if-not-true-then-false.com/rhel/$(rpm -E %rhel)/$(uname -i)/10_1

## OR ##

## Red Hat (RHEL) 7/6/5 MariaDB 10.2 ##
wget -O /etc/yum.repos.d/MariaDB.repo http://mariadb.if-not-true-then-false.com/rhel/$(rpm -E %rhel)/$(uname -i)/10_2

## OR ##

## CentOS 7/6/5 MariaDB 10.0 ##
wget -O /etc/yum.repos.d/MariaDB.repo http://mariadb.if-not-true-then-false.com/centos/$(rpm -E %centos)/$(uname -i)/10

## OR ##

## Red Hat (RHEL) 7/6/5 MariaDB 5.5 ##
wget -O /etc/yum.repos.d/MariaDB.repo http://mariadb.if-not-true-then-false.com/rhel/$(rpm -E %rhel)/$(uname -i)/5

3. Update or Install MariaDB 10.1/10.0

Fedora 25/24/23 (own packages)

Bash

dnf install mariadb mariadb-server

CentOS/Red Hat (RHEL) 7.3/6.8/5.11 (and Fedora 25/24/23 using MariaDB repos)

Bash

yum install MariaDB MariaDB-server

4. Start MariaDB server and autostart MariaDB on boot

Fedora 25/24/23 and CentOS/RHEL 7.3

Bash

systemctl start mariadb.service ## use restart after update

systemctl enable mariadb.service

CentOS 6.8/5.11 and Red Hat (RHEL) 6.8/5.11

Bash

service mysql start ## use restart after update
## OR ##
/etc/init.d/mysql start ## use restart after update

chkconfig --levels 235 mysql on

5. MariaDB (MySQL) Secure Installation

  • Set (Change) root password
  • Remove anonymous users
  • Disallow root login remotely
  • Remove test database and access to it
  • Reload privilege tables

Start MariaDB (MySQL) Secure Installation with following command

Bash

/usr/bin/mysql_secure_installation
Output:
Bash

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!

In order to log into MariaDB to secure it, we\'ll need the current
password for the root user.  If you\'ve just installed MariaDB, and
you haven\'t set the root password yet, the password will be blank,
so you should just press enter here.

Enter current password for root (enter for none): 
OK, successfully used password, moving on...

Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.

Set root password? [Y/n] y
New password: 
Re-enter new password: 
Password updated successfully!
Reloading privilege tables..
 ... Success!


By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] y
 ... Success!

Normally, root should only be allowed to connect from \'localhost\'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] y
 ... Success!

By default, MariaDB comes with a database named \'test\' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] y
 ... Success!

Cleaning up...

All done!  If you\'ve completed all of the above steps, your MariaDB
installation should now be secure.

Thanks for using MariaDB!
Note: If you don’t want some reason, do a “MySQL Secure Installation” then at least it’s very important to change the root user’s password
Bash

mysqladmin -u root password [your_password_here]

## Example ##
mysqladmin -u root password myownsecrectpass

6. Connect to MySQL database (localhost) with password

Bash

mysql -u root -p

## OR ##
mysql -h localhost -u root -p

7. Create Database, Create MySQL User and Enable Remote Connections to MySQL Database

This example uses following parameters:
  • DB_NAME = webdb
  • USER_NAME = webdb_user
  • REMOTE_IP = 10.0.15.25
  • PASSWORD = password123
  • PERMISSIONS = ALL
SQL

## CREATE DATABASE ##
MariaDB [(none)]> CREATE DATABASE webdb;

## CREATE USER ##
MariaDB [(none)]> CREATE USER 'webdb_user'@'10.0.15.25' IDENTIFIED BY 'password123';

## GRANT PERMISSIONS ##
MariaDB [(none)]> GRANT ALL ON webdb.* TO 'webdb_user'@'10.0.15.25';

##  FLUSH PRIVILEGES, Tell the server to reload the grant tables  ##
MariaDB [(none)]> FLUSH PRIVILEGES;

Enable Remote Connection to MariaDB Server –> Open MySQL Port (3306) on Iptables Firewall (as root user again)

1. CentOS/Red Hat (RHEL) 6.8/5.11

1.1 Edit /etc/sysconfig/iptables file:

Bash
nano -w /etc/sysconfig/iptables

1.2 Add following INPUT rule:

Bash
-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT

1.3 Restart Iptables Firewall:

Bash

service iptables restart
## OR ##
/etc/init.d/iptables restart

2. Fedora 25/24/23 and CentOS/Red Hat (RHEL) 7.3

2.1 List Your Active Firewalld Zones

Bash

firewall-cmd --get-active-zones
Example output:
public
  interfaces: wlp1s0

2.2 Add New Rule to Firewalld

You might have active zone like public, FedoraWorkstation, FedoraServer.
Bash

firewall-cmd --permanent --zone=public --add-service=mysql

## OR ##

firewall-cmd --permanent --zone=public --add --port=3306/tcp

2.3 Restart firewalld.service

Bash

systemctl restart firewalld.service

3. Test remote connection

Bash

mysql -h 10.0.15.25 -u myusername -p

Comments

Post a Comment

Popular posts from this blog

How to measure disk performance with fio and IOPing

Image
Introduction Whether it’s a server, or a PC for work, what usually limits performances is disk speed. Even if using SSDs, their speed is not yet comparable to that of RAM and CPU. There are different tools with or without a graphical interface, written for testing disks speed. There are also people who use  dd , for example: dd if=/dev/zero of=test_file bs=64k count=16k conv=fdatasync However, in our opinion dd is the worst software for benchmarking I/O performance. In fact: it is a single-threaded, sequential-write test. Of course, if running a web server, services do not do long-running sequential writes, and use more than one thread it writes a small amount of data, so the result can be influenced by caching or by RAID’s controller it executes for just a few seconds, and everyone knows that in this way it’s not possible to have consistent results there are no reading speed tests All these points just lead to one conclusion: better to use anything else. For disk benc
Keep reading

How to Install Apache on CentOS 7

Image
Apache is an open-source web server that can be configured to serve a single or multiple websites using the same Linode. This guide explains how to install and configure the Apache web server on CentOS 7. This guide is written for a root user. Replace each instance of example.com in this guide with your site’s domain name.  Before You Begin Ensure that you have followed the Getting Started and Securing Your Server guides, and the hostname is set. To check your hostname run: # hostname # hostname -f The first command should show your short hostname, and the second should show your Fully Qualified Domain Name (FQDN). Update your system: # sudo su - # yum update Install and Configure Apache # yum install httpd Modify httpd.conf with your document root directory to point Apache to your site’s files. Add the <IfModule prefork.c> section below to adjust the resource use settings. The settings shown below are a good starting point for a 2GB: Before chang
Keep reading

Install and configure Jenkins on Ubuntu 16.04

Image
Introduction Jenkins  is an automation server written in Java, as a fork of the  Hudson  project. It helps to automate part of the software development process, with aids like continuous integration, but also by further empowering teams to implement the technical part of a Continuous Delivery.  Jenkins  supports many SCM (Source Control Management) software systems including  Git ,  SVN , and  Mercurial  and provides hundreds of plugins to automate projects. This tutorial explains how to install and use Jenkins on Ubuntu 16.04 using Apache as server . Install Java Jenkins  requires Java, so, install  OpenJDK7  on the server. First, install  python-software-properties : # apt install python-software-properties Then you can add Java repository: # add-apt-repository ppa:openjdk-r/ppa Update Ubuntu repos and install OpenJDK: # apt update # apt install openjdk-7-jdk Run  $ java -version  to verify that you have OpenJDK7 correctly installed. Install Jenkins Jenkins team
Keep reading